Peanut Butter Swirled Fudge Recipe (2024)

FAQs

What causes peanut butter fudge not to harden? ›

The amount of time you cook fudge directly affects its firmness. Too little time and the water won't evaporate, causing the fudge to be soft. Conversely, cook it too long and fudge won't contain enough water, making it hard with a dry, crumbly texture.

The key to successful, nongrainy fudge is in the cooling, not the cooking. The recipe calls for heating the ingredients to the soft-ball stage, or 234° F, then allowing it to cool undisturbed to approximately 110° F.

Candy that isn't cooked long enough will end up too soft; overcooking makes fudge crumbly or hard. High-quality fudge has many small crystals. If the process of crystallization begins too early, fewer crystals form and they become much larger.

Use Evaporated Milk- Make sure to use evaporated milk and not sweetened condensed milk. If you accidentally use sweetened condensed milk your fudge will be incredibly over the top sweet. Cut up the Butter– Before adding the butter in make sure to cut it into smaller pieces for faster melting.

If the humidity was too high, it would come out sticky and gooey and there was nothing you could do about it.

To fix it, you can reheat the fudge mixture over low heat and continue cooking until it reaches the proper temperature. Be sure to use a candy thermometer to monitor the temperature accurately. Alternatively, you can try to salvage chewy fudge by mixing it into ice cream or using it as a topping for desserts.

Stir the ingredients to dissolve the sugar until the mixture comes to a boil. If your recipe uses milk, stirring will keep the mixture from curdling. But once it reaches about 236–238 degrees F/113–114 degrees C (the "soft-ball" stage), do not stir it or even shake the pan.

Too cooked

This fudge was cooked to a temperature of 118 °C (244 °F). At this temperature, the sugar is too concentrated and there is not enough water left to form syrup around sugar crystals. The result is hard and brittle fudge.

What is the secret to smooth fudge that is not gritty? ›

If the sugar crystals are not properly dissolved before cooling, they can create a gritty texture. To avoid this, ensure that you stir the fudge mixture consistently and remove any sugar crystals that form on the sides of the pan using a wet pastry brush.

It could even be because the fudge wasn't beaten long or hard enough. If you are using an electric whisk instead of hand beating your Homemade Fudge it's important to remember that this is a very easy way to overbeat Fudge.

With its very similar consistency, 1 cup of heavy cream can replace 1 cup of evaporated milk in sweet and savory dishes. While the flavor will be blander than evaporated milk's unique caramelized tones, the texture will be noticeably richer.

Half-and-half has less protein and more fat than evaporated milk, but you can substitute the same amount of half-and-half for evaporated milk in a recipe. You won't get the same note of caramelized flavor that you would from evaporated milk, but the creamy consistency makes this an excellent substitute.

Evaporated milk is milk that has been cooked to reduce its water content. It is more stable than regular milk and it can be cooked at high temperatures without curdling, a real benefit to fudge. Unfortunately, there is no substitute for it in a fudge recipe.

Don't panic if your fudge is grainy, nothing is lost it just requires some more work. Pop the grainy fudge back into the pan along with some water and a little cream and melt the fudge back down to a liquid and re-boil it to temperature.

Undercooked. This fudge was cooked until the temperature reached only108 °C (226 °F). At this temperature, the sugar is not concentrated enough... there is too much leftover water in the syrup and the resulting fudge is soft.

Pour the fudge back into your pan, and add about a cup of water to it, along with a tablespoon or two of evaporated milk, whipping cream, or whatever cream you're using. Some people skip the water and just add cream to the mixture to reheat.

If the fudge is very soft and slightly chewy then it is possible that it did not quite cook to soft ball stage and next time the mixture should be cooked to a slightly higher temperature (soft ball is 112-116c/235-240F and a sugar or candy thermometer can help).